Cisco Unified Communications Manager
Contact your CUCM administrator to get the information
needed.
Enter IP address or DNS name in the
Host server address
field,
and select
OK
to confirm the change*.
You can find more details about setting up CUCM provisioning
in the
Administering CE endpoints on CUCM
guide.
* The DHCP server can be set up to provide the Host server address
automatically (DHCP Option 150). Any input set up here overrides the
setting provided by DHCP.
CUCM via Expressway
Contact your CUCM administrator to get the information
needed.
Enter
Username
,
Passphrase
and
Domain
in the corresponding
input fields. Always select
OK
to confirm the changes. Select
Apply
to save.
In some cases, you must manually enter the Expressway
address. Select
Manually override Expressway address
, and
enter the address you have received upon ordering in the
Host
Server Address
field.
VCS
Contact your VCS provider to get the information needed.
1. Enter IP address or DNS name of the Cisco VCS in the
Host server address
and select
OK
to confirm the change.
2. Enter the
Username
, and
Passphrase
, if required, for
authenticating the video system with the provisioning
server. Select
OK
to confirm the change
3. Enter SIP
Domain
and select
OK
to confirm the change.
4. Select
Apply
to save the changes.
Have a look at the
appendix for more
information on VCS provisioning.
To check that the SX10 is registered: Navigate to the
gearwheel icon in the upper left corner of the home
screen and
select
System Information
.
Cisco TelePresence Video Systems
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
23
Getting Started Guide
Introduction
User interfaces
Web interface
On-screen setup assistant
Appendices
Touch
On-screen setup assistant
