The Touch controller Settings
menu
To open the
Settings
menu, tap the system or user name in the
upper left corner and tap
Settings
.
System configuration
To enter the
Administrator Settings
menu, tap
Administrator
,
enter
Username
and
Passphrase
, and log in. A soft keyboard
appears when you tap the input fields. Tap
Admin Settings
.
The
Administrator Settings
menu is protected with the system
passphrase.
Read how to configure your system with a Touch controller
You can set restrictions to users’ access to the settings
menu. This can be done on the web interface. Go to
Setup
> Configuration > User Interface
and set
User Preferences
to
Off
. With this restriction, only
System Information
,
Call Status
,
Diagnostics
and
Restart
are available for the users.
You can find a complete description of the Touch controller
menus in the user guide for your video conference system.
Not all settings are available on all products; therefore the menu
items shown to the right may or may not be present on your
system.
Settings
System Information
Camera Control
Ringtone & Sound
Administrator
Call Status
Diagnostics
Language
Restart
Display
The Settings menu
•
Ringtone & Sound
: Select a ring tone, the ring tone volume and key tone.
•
Camera Control
: Set the whitebalance, exposure and backlight compensation.
•
Main Source Selection
: Select the main input source, e.g. camera control.
•
Display
: Select brightness, whitebalance and DVI mode for the main video display.
•
Language
: Select the language for the user interface.
•
System Information
: An overview of the system configurations.
•
Call Status
: An overview of the call parameters when in call, e.g. protocols,
transmit and receive rates, packet loss.
•
Diagnostics
: Set additional system logging on.
•
Restart
: Restart the system.
•
Administrator
: See below.
The Administrator Settings menu
•
Tracking
:
Choose tracking speed and set up snap-to-whiteboard feature
when you have a SpeakerTrack 60 camera.
•
Date, Time & Location
: Configure date and time settings.
•
Call Details
: Configure the default call rate and auto answer settings.
•
Provisioning
: Start the provisioning wizard.
•
Pairing
:
See information about the endpoint the Touch is paired to, and
unpair from that endpoint
.
•
IP & VLAN
: Configure the IP and VLAN settings. If the Touch controller
is connected via LAN, there are separate entries for the codec and the
Touch.
•
Network Status - Codec
: Current network status for the codec.
•
Network Status - Touch
: Current network status for the Touch controller.
•
SIP
: Configure the SIP settings.
•
H323
: Configure the H.323 settings.
•
Security
: See which certificates are installed on your system.
•
EMC Resilience
: Change the Touch controller's resilience to electromag-
netic noise.
•
Reset
: Complete a factory reset. This resets all of your settings. You
cannot undo a factory reset.
Main Source Selection
Administrator Setti
EMC Resilience
Reset
Call Details
Back
Pairing
IP & VLAN
Provisioning
SIP
H323
Date, Time & Location
Network Status
Tracking
Security
Cisco TelePresence Video Systems
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
11
Getting Started Guide
Introduction
User interfaces
Web interface
On-screen setup assistant
Appendices
Touch
User interfaces
