Provisioning set-up
(When using a provisioning system)
If in doubt for any of the parameters below, contact your provi-
sioning system provider.
See the administrator guide for your product, to find more
information about the individual provisioning settings.
Select provisioning infrastructure
1. Go to the
Setup
tab, and click
Configuration
.
2. Open the
Provisioning
settings from the left column.
3. Select a provisioning infrastructure from the
Mode
drop
down list:
• TMS – Cisco TelePresence Management System (Not avail-
able for SX10)
• VCS – Cisco Video Communication Server
• CUCM – Cisco Unified Communications Manager
• Auto - The system starts provisioning by first trying VCS,
then TMS and finally CUCM.
• Edge - CUCM via Expressway
If you select
Off
, all configurations must be set manually.
Set the required provisioning parameters
Which parameters to set depend on which infrastructure was selected.
TMS
1. It may be required to authenticate the video system with
Cisco TMS. If so, enter
LoginName
and
Password
in the
respective input fields.
2. Enter the IP address or DNS name of the Cisco TMS server
in the
Address
input field under the
ExternalManager
heading.*
3. Enter the
Path
to the provisioning service in the corre-
sponding input field.
VCS
1. It may be required to authenticate the video system with
the Cisco VCS. If so, enter
LoginName
and
Password
in the
respective input fields.
2. Enter the IP address or DNS name of the Cisco VCS in the
Address
input field under the
ExternalManager
heading.*
3. Enter the SIP
Domain
for the Cisco VCS in the correspond-
ing input field.
Have a look at the
appendix for more
information about VCS provisioning.
Unified Communications Manager
Enter the IP address or DNS name of the CUCM provisioning
server in the
Address
input field under the
ExternalManager
heading.*
You can find more details about setting up CUCM provisioning
in the
Administering CE endpoints on CUCM
guide.
CUCM via Expressway
Upon ordering the CUCM via Expressway service, you have
received a username, password, and domain name.
1. Enter the username in the
LoginName
input field.
2. Enter the password in the
Password
input field.
3. Enter the domain name in the
Domain
input field under the
ExternalManager
heading.
In some cases, you must manually enter the Expressway
address. Enter the address you have received upon ordering
in the
Address
input field under the
ExternalManager
heading.
* The DHCP server can be set up to provide the External Manager address
automatically (Option 242 for TMS; Option 150 for UCM). Any input set up
here overrides the setting provided by DHCP.
If you are changing a value setting,
you have to always click
save
to confirm the change.
Cisco TelePresence Video Systems
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
14
Getting Started Guide
Introduction
User interfaces
Web interface
On-screen setup assistant
Appendices
Touch
Web interface
