Configuring Phone Lines and Calling Routing Behavior
Configuring SPA9000 FXS Ports
SPA9000 Voice System Administration Guide
57
4
Configuring SPA9000 FXS Ports
The SPA9000 FXS ports can be used to connect analog phones and fax machines
to the SPA9000 Voice System. A port also can be configured for a Streaming
Audio Server for Music On Hold. See
Chapter 6, “Configuring Music on Hold.”
NOTE
A fax machine can be connected to the Phone port of the SPA9000. Fax support
through an ITSP line requires a T.38 fax machine on both ends and the availability
of T.38 FAX relay through the ITSP. T.38 support is dependent on fax machine and
network / transport resilience. Linksys makes no guarantee with the use of this
product regarding fax transmission services
STEP 1
Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin
Login and then click Advanced.
STEP 2
Click
Voice tab > FXS
N
, where N is the port number.
STEP 3
Scroll down to the
Subscriber Information
section, and then enter the following
settings:
•
Display Name:
Enter an extension number of name for the FXS 1 port, such as
Receptionist Area Fax Machine. You can use this extension number to add the
analog phone to the contact list, hunt groups, and shared line appearances.
•
User ID:
Enter a three- to four-digit extension number that is not is use by other
extension.
•
If the device is a fax machine, disable echo cancelling. On the
FXS N
page,
Audio Configuration
section, set the
FAX Disable ECAN
field to
yes
. Also make
sure that the
Preferred Codec
is set to
G.711u
(default setting).
STEP 4
Enter the
Dial Plan
settings, as needed. See
“Configuring Dial Plans,” on page 66
.
STEP 5
Click
Submit All Changes
.
