SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
254
B
SIP Debug Option
SIP messages are received at or sent from the proxy listen
port. This feature controls which SIP messages to log.
Choices are as follows:
none—No logging.
1-line—Logs the start-line only for all messages.
1-line excl. OPT—Logs the start-line only for all messages
except OPTIONS requests/responses.
1-line excl. NTFY—Logs the start-line only for all messages
except NOTIFY requests/responses.
1-line excl. REG—Logs the start-line only for all messages
except REGISTER requests/responses.
1-line excl. OPT|NTFY|REG—Logs the start-line only for all
messages except OPTIONS, NOTIFY, and REGISTER
requests/responses.
full—Logs all SIP messages in verbose mode.
full excl. OPT—Logs all SIP messages in full text except
OPTIONS requests/responses.
full excl. NTFY—Logs all SIP messages in full text except
NOTIFY requests/responses.
full excl. REG—Logs all SIP messages in full text except
REGISTER requests/responses.
full excl. OPT|NTFY|REG—Logs all SIP messages in full text
except for OPTIONS, NOTIFY, and REGISTER requests/
responses.
Default:
None
Restrict Source IP
If line interfaces use the same SIP Port value and the Restrict
Source IP feature is enabled, the proxy IP address for Lines 1
and 2 is treated as an acceptable IP address for both lines. To
enable the Restrict Source IP feature, select yes. Otherwise,
select no. A source IP address is untrusted if it does not
match any of the IP addresses resolved from the configured
<Proxy> (or <Outbound Proxy> if <Use Outbound Proxy> is
yes).
Default:
no
Referor Bye Delay
Controls when the SPA9000 sends BYE to terminate stale call
legs upon completion of call transfers. Multiple delay settings
(Referor, Refer Target, Referee, and Refer-To Target) are
configured on this screen. For the Referor Bye Delay, enter
the appropriate period of time in seconds.
Default:
4
