Administering the SPA400 and Voice Mail Service
Managing Access to the SPA400 Web-Based Configuration Utility
SPA9000 Voice System Administration Guide
106
5
4. Save the configuration as Web Page Complete. The currently displayed page is
saved. You can use the saved file to review the settings as needed.
5. Repeat these steps for each page, as needed.
Managing Access to the SPA400 Web-Based Configuration
Utility
One log on can be established for access to the SPA400 web-based configuration
utility. The default username of Admin can be changed, and a password can be
entered.
STEP 1
Connect to the SPA400 administration web server. (See
“Connecting to the
SPA400 Administration Web Server,” on page103
.)
STEP 2
Click
Administration
tab > Management
.
SPA400 Administration > Management
STEP 3
Proceed as needed:
•
Gateway Username:
Type the desired username in this field, up to 32
characters.
•
Gateway Password:
Type the password.
•
Retype to Confirm:
Type the password again. Both entries must match exactly.
STEP 4
Click
Save Settings
.
STEP 5
To restart the SPA400, complete the following steps:
a. Click
Administration
tab >
Reboot.
b. Click the Restart System button.
c. When the confirmation message appears, click OK. The SPA400 reboots.
