Cisco Linksys SFE2000 Скачать руководство пользователя страница 91

Страница: 91 / 410

Configuring Device Security

Defining 802.1X

Cisco Small Business SFE/SGE Managed Switches Administration Guide

Enable

— Enables port-based authentication on the device.

Disable

— Disables port-based authentication on the device.

•

Authentication Method — Defines the user authentication methods. The
possible field values are:

RADIUS, None

— Indicates port authentication is performed first via the

RADIUS server. If no response is received from RADIUS (for example, if
the server is down), then the

None

option is used, and the session is

permitted

RADIUS

— Authenticates the user at the RADIUS server.

None

— No authentication method is used to authenticate the port.

•

Guest VLAN — Specifies whether the Guest VLAN is enabled on the device.
The possible field values are:

Checked

— Enables using a Guest VLAN for unauthorized ports. If a

Guest VLAN is enabled, the unauthorized port automatically joins the
VLAN selected in the

VLAN List

field.

Unchecked

— Disables use of a Guest VLAN for unauthorized ports.

This is the default.

•

Guest VLAN ID — Contains a list of VLANs. The Guest VLAN is selected from
the VLAN list.

STEP 2

Modify the relevant fields.

STEP 3

Click Apply. The 802.1X properties are modified, and the device is updated.

Defining Port Authentication

The

802.1X Port Authentication Page

provides parameters for defining 802.1X on

ports.

Содержание Linksys SFE2000



























































































































































































































































































































































































































Результаты поиска

Содержание Linksys SFE2000

Отзывы:

Похожие инструкции для Linksys SFE2000

Бренды по названию

Популярные бренды

Cisco Linksys SFE2000, Руководство администратора

Результаты поиска

Содержание Linksys SFE2000

Отзывы:

Похожие инструкции для Linksys SFE2000

Бренды по названию

Популярные бренды