Configuring Regional Parameters and Supplementary Services
Using a Dial Plan
Cisco SPA and Wireless IP Administration Phone Guide
163
8
STEP 5
Click Submit All Changes.
Parameter
Description
Dial Plan
Dial plan script for the selected extension.
The dial plan syntax allows the designation of three
parameters for use with a specific gateway:
•
uid – the authentication user-id
•
pwd – the authentication password
•
nat – if this parameter is present, use NAT mapping
Separate each parameter with a semi-colon (;).
See the
Cisco SPA9000 Voice System Administration Guide
for more detailed information on dial plans.
Caller ID Map
Inbound caller ID numbers can be mapped to a different string.
For example, a number that begins with +44xxxxxx can be
mapped to 0xxxxxx. This feature has the same syntax as the
Dial Plan parameter. With this parameter, you can specify how
to map a caller ID number for display on screen and recorded
into call logs.
NOTE
Not applicable to WIP310.
Enable IP Dialing
Enable or disable IP dialing.
Defaults to no.
Emergency Number
Enter a comma-separated list of emergency numbers. When
one of these numbers is dialed, the unit disables processing of
CONF
,
HOLD
, and other similar softkeys or buttons to avoid
accidentally putting the current call on hold. The phone also
disables hook flash event handling.
Only the far end can terminate an emergency call.
The phone is restored to normal after the call is terminated and
the SPA9X2 is back on-hook.
Maximum number length is 63 characters.
Defaults to blank (no emergency number).
NOTE
Not applicable to WIP310.
