Cisco Linksys AG310 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 88

Cisco Linksys AG310 Скачать руководство пользователя страница 48

42

Chapter 6: Configuring the ADSL2+ Gateway
The Applications & Gaming - QoS Tab

ADSL2+ Gateway with VoIP

This window lets you set the priority for packets selected by any of the following criteria, alone or in combination:

•

Destination. IP address and Netmask (address mask), FQDN (Fully Qualified Domain Name).

•

Source. IP address and Netmask (address mask).

•

Source MAC. Source MAC address.

•

Destination MAC. Destination MAC address.

•

Protocol (Transport). TCP, UDP, ICMP, or All.

•

Dst Port/Scr Port (Destination port and/or source port). If protocol is set to TCP or UDP.

•

Ethernet Type. The value in the 13th and 14th octets of an Ethernet frame.

•

ALG. Triggering of a particular Application Layer Gateway (FTP, TFTP, H.323, IRC, MMS, GRE, PPTP, SIP, or
RTSP).

•

802.1D User Priority. Presence of a specified IEEE 802.1D user priority marker.

•

802.1Q VID. Presence of a specified IEEE 802.1Q virtual LAN (VLAN) ID.

•

Packet length Min/Max. Packet length between specified minimum and maximum numbers of octets.

•

Priority. Set the priority of None, Low, Medium, or High.

Fragment packets’ size of AF and BE traffic to be equal to the size of EF traffic: Enable this option and input a
packet size to have large Assured Forwarding (medium priority) and Best Effort (low priority) packets fragmented
so they will not uduly delay Expedited Forwarding (high priority) packets. The value you enter should be from 68
to 1492.

When you have finished making changes in this window, click the

Save

button to save the changes, or click the

Cancel

button to undo your changes. Then click

Close

. You will be returned to the QoS panel. Click the

Save

Settings

button to save your changes, or click the

Cancel Changes

button to undo your changes.

Figure 6-36: Edit List of QoS Settings

«
...
46
47
48
49
50
...
»

Содержание Linksys AG310

























































































Отзывы:

Нет отзывов