manualshive.com logo in svg

Cisco Linksys AG310, Руководство пользователя, Страница: 11 / 88

Поделиться
Скачать
Cisco Linksys AG310 Скачать руководство пользователя страница 11

5

Chapter 3: Getting to Know the ADSL Gateway
Back Panel

ADSL2+ Gateway with VoIP

Chapter 3: Getting to Know the ADSL Gateway

Back Panel

The Gateway’s ports and Reset button are located on the back panel.

DSL

The 

DSL 

port connects to the ADSL line from your telephone wall jack.

Line

The 

Line 

port connects 

your standard telephone and converts the signal to VoIP technology.

Phone

The 

Phone

 port connects to an analog phone (or fax machine) with an RJ-11 telephone cable. The 

primary purpose of this port is to allow a phone to be connected that will function during power outages, 
in case of an emergency. 

Ethernet (1-4)

The 

Ethernet 

ports connect to your computers and other network devices.

Reset Button

There are two ways to reset the Gateway's factory defaults. Either press the 

Reset Button

, for 

approximately ten seconds, or restore the defaults from the 

Factory Defaults

 screen of the 

Administration

 tab in the Gateway’s web-based utility.

Power

The 

Power

 port is where you will connect the power adapter.

IMPORTANT:

Resetting the Gateway to factory 

defaults will erase all of your settings 
(including Internet connection and other 
settings) and replace them with the factory 
defaults. Do not reset the Gateway if you want 
to retain these settings.

Figure 3-1: Back Panel

Содержание Linksys AG310

























































































Отзывы:

Нет отзывов