![background image](http://html.mh-extra.com/html/cisco/dpq2425/dpq2425_user-manual_64911013.webp)
4028630 Rev A
13
Introduction
Front Panel Description
The front panel of your wireless residential gateway provides LED status indicators
that indicate how well and at what state your wireless residential gateway is
operating. See
Front Panel LED Status Indicator Functions
(on page 111), for more
information on front panel LED status indicator functions.
1
POWER
—ON, AC power is applied to the wireless residential gateway
2
DS
—ON, the wireless residential gateway is receiving data from the cable
network
3
US
—ON, the wireless residnetial gateway is sending data to the cable network
4
ONLINE
—ON, the wireless residential gateway is registered on the network
and fully operational
5
ETHERNET 1 - 4
—ON, a device is connected to one of the Ethernet ports.
BLINKING indicates that data is being transferred over the Ethernet connection
6
WIRELESS LINK
—ON, the Wireless Access Point is operational. BLINKING,
data is being transferred over the wireless connection. OFF, the wireless access
point has been disabled by the user
7
WIRELESS SETUP
—OFF (normal condition), wireless setup is not active.
BLINKING, the user has activated wireless setup to add new wireless clients on
the wireless network
8
TEL1
—ON, telephony service is enabled. Blinking, line 1 is in use. OFF, phone
service for TEL 1 is not enabled
Содержание DPQ2425
Страница 8: ......