background image

2N® EasyGate IP is designed primarily for voice 
transmission over VoIP (or VoLTE, GSM, UMTS) 
between a mobile network and a connected FXO-
equipped terminal (PBX, phone, lift communicator, 
answering machine, etc.). When connected to the 
2N® Elevator Center cloud service, the gateway’s 
functionality is extended to include remote 
management, auto provisioning, real-time device 
state monitoring and others.

2N® EasyGate IP 

Quick  Guide   

Product Introduction

Basic Functions 

• Calls (VoIP, VoLTE, CS call)
• Data transmission
• SMS sending
• Autonomous battery operation

• Remote management (2N® Elevator Center)

        

• automatic configuration

 

• bulk upgrade

 

• remote access

 

• real-time device state monitoring

The 2N® EasyGate IP package 
includes the following: 

2N Telekomunikace a.s., Modřanská 621, Prague 4, 143 01

www.2n.cz

2N TELEKOMUNIKACE a.s. hereby declares that the 2N® EasyGate IP product is in compliance 
with the 2014/53/EU and 2011/65/EU directives. Refer to www.2n.cz for the full wording of the EU 
declaration of conformity.

2N® Easy Gate IP

1 pc

DIN rail holder

1 pc

Dowels (6 mm) with screws (4.5 x 40 mm)

2 + 2 pcs

Screw for fitting the device in the holder

1pc

Antenna

1 pc

FXS cable

1 pc

Power supply

1 pc

Quick guide

1 pc

NiMH type AA, 1.2 V / 2000 mAh battery

4 pcs

 2516v1.2

LED Indicators

Power supply

• Blue – mains power

• Red – HW error

• Green – battery power

• Yellow – battery removal required, two-year life exceeded

• Yellow flashing once in 1 s (0.5 s / 0.5 s) – battery error 

• No light – device off

If an HW error is indicated by the red LED, request a remedy 

or compensation from your distributor.

Network

• Blue – primary SIM card used

• Yellow – secondary SIM card used

Function:

• Light on – connected to the network

• Flashing once in 1 s – disconnected from the network, SIM card detected

• Flashing once in 3 s – disconnected from the network, no response from SIM card

Line

 

• Blue – SIP call

• Green – VoLTE call

• Yellow – call via a mobile voice channel

Function:

• No light – onhook

• Flashing once in 1 s – onhook, dialing / incoming call (ringing) in progress

• Light on – active call

Data

• Blue – connected to the 4G network

• Green – connected to the 3G network

• Yellow – connected to the 2G network

Function:

• Flashing once in 3 s – Internet connection in progress 

  (criteria – connection to My2N)

• Flashing once in 1 s – SIP Proxy connection in progress

• Light on – connected

Signal

Signaling of the 2G, 3G or 4G signal strength.

4

1

Reviews: