84
4028630 Rev A
How Do I Configure My Wireless Residential Gateway with Digital Voice Adapter?
Configuring Your Wireless Network Security and Encryption
Parameters
Use the Setup Wireless - Security page to configure your WAP wireless equivalent
privacy (WEP) encryption keys and authentication.
Note:
If you are not familiar with the advanced settings detailed in this section,
contact your service provider before you attempt to change any of the wireless
residential gateway default wireless security settings.
Click
Security
in the Wireless section of the Setup page to access the Setup Wireless -
Security page.
Important:
Your wireless residential gateway ships from the factory with WPA
security enabled to provide you with a
basic
level of wireless network security. To
gain initial access to your wireless network, select WPA security on your computer's
wireless adapter and enter the WPA key to match the key setup in your gateway.
The factory default WPA key in the gateway is the serial number of the device. You
can continue to use this factory default key. However, to maximize your wireless
security, it is highly recommended that you use something other than the factory
default key.
Using Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) allows you to easily attach wireless devices that also
support WPS. When WPS is enabled and activated, you can attach other wireless
clients with the press of a button or by entering the station PIN.
After enabling WPS, you can activate the automatic registration by clicking the
Start
WPS
button in the WPS section of the Setup Wireless - Security page.
Содержание DPQ2425
Страница 8: ......
