D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
104
Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Administrator Guide
SystemUnit settings
SystemUnit Name
Enter a System Name to define a name of the system unit. If the H.323 Alias ID is configured
on the system then this ID will be used instead of the system name. The system name will be
displayed:
1) When the codec is acting as an SNMP Agent.
2) Towards a DHCP server.
Requires user role:
ADMIN
Value space:
<S: 0, 50>
Format:
String with a maximum of 50 characters.
Example:
SystemUnit Name: "Meeting Room"
SystemUnit MenuLanguage
Select the language to be used in the menus on screen, or on the Touch screen control panel.
All languages are not supported on both user interfaces. The default language is English.
Requires user role:
USER
Value space:
<English/ChineseSimplified/ChineseTraditional/Catalan/Czech/Danish/
Dutch/Finnish/French/German/Hungarian/Italian/Japanese/Korean/Norwegian/Polish/
PortugueseBrazilian/Russian/Spanish/SpanishLatin/Swedish/Turkish/Arabic/Hebrew>
Example:
SystemUnit MenuLanguage: English
SystemUnit CallLogging Mode
Set the call logging mode for calls that are received or placed by the system. The call logs may
then be viewed via the web interface or using the xHistory command.
Requires user role:
ADMIN
Value space:
<Off/On>
Off:
Disable logging.
On:
Enable logging.
Example:
SystemUnit CallLogging Mode: On
SystemUnit ContactInfo Type
Choose which type of contact information to show in the status field in the upper left corner
of the main display and Touch screen control panel. The information can also be read with the
command xStatus SystemUnit ContactInfo.
Requires user role:
ADMIN
Value space:
<Auto/None/IPv4/IPv6/H323Id/E164Alias/H320Number/SipUri/SystemName/
DisplayName>
Auto:
Show the address which another system can dial to reach this system. The address
depends on the default call protocol and system registration.
None:
Do not show any contact information in the status field.
IPv4:
Show the IPv4 address as contact information.
IPv6:
Show the IPv6 address as contact information.
H323Id:
Show the H.323 ID as contact information (see the H323 Profile [1..1] H323Alias ID
setting).
E164Alias:
Show the H.323 E164 Alias as contact information (see the H323 Profile [1..1]
H323Alias E164 setting).
H320Number:
Show the H.320 number as contact information (only applicable if connected
to a Cisco TelePresence ISDN Link gateway).
SipUri:
Show the SIP URI as contact information (see the SIP Profile [1..1] URI setting).
SystemName:
Show the system name as contact information (see the SystemUnit Name
setting).
DisplayName:
Show the display name as contact information (see the SIP Profile [1..1]
DisplayName setting).
Example:
SystemUnit ContactInfo Type: Auto
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
System settings
