Chapter 4 Installation and Maintenance
Removing and Replacing a Power Supply Unit
SCE 2000 4xGBE Installation and Configuration Guide
4-22
OL-7824-02
Note
The power supply is not fully seated until you tighten the installation screw on the faceplate.
This completes the procedures for replacing a power supply in a
SCE 2000
platform.
Reconnecting the Power
The following sections describe how to reconnect the AC or DC power:
•
Reconnecting AC-Input Power Supply Unit
(on page
4-22
)
•
Reconnecting DC-Input Power Supply Unit
(on page
4-23
)
Reconnecting AC-Input Power Supply Unit
The following procedures explain how to reconnect an AC-input power to the
SCE 2000
platform.
If you are reconnecting DC-input power, proceed to
Reconnecting DC-Input Power Supply Unit
(on page
4-23
).
To reconnect the AC-input power to the
SCE 2000
platform, complete the following steps:
Step 1
Plug the AC-input power cable into the AC-input power receptacle on the AC-input
power supply
Figure 4-14: Connecting the AC Power
