Chapter 7 Basic SCE 2000 Platform Operations
Managing SCE 2000 Configurations
SCE 2000 4xGBE Installation and Configuration Guide
7-4
OL-7824-02
E
XAMPLE
:
The following example shows the current User-File-Log device counters.
SCE 2000
#
show logger device user-file-log counters
Logger device User-File-Log counters:
Total info messages: 1
Total warning messages: 0
Total error messages: 0
Total fatal messages: 0
If there are “Total error messages” or “Total fatal messages”, use the
show logger device
User-File-Log
command to display details about the errors.
Managing SCE 2000 Configurations
The procedures for managing
SCE 2000
configurations are explained in the following sections:
•
Viewing Configuration
(on page
7-4
)
•
Saving the Configuration Settings
(on page
7-7
)
•
Recovering a Previous Configuration
(on page
7-9
)
Viewing Configuration
When you enter configuration commands, it immediately effects the
SCE 2000
platform operation
and configuration. This configuration, referred to as the
running-config
,
is saved in the
SCE
2000
platform volatile memory and is effective while the
SCE 2000
platform is up. After reboot,
the
SCE 2000
platform loads the
startup-config
, which includes the non-default
configuration as saved by the user, into the
running-config
.
The
SCE 2000
platform provides commands for:
•
Viewing the running configuration
•
Viewing the startup configuration
After configuring the
SCE 2000
platform, you may query for the running configuration using the
command
show running-config
.
This command displays the non-default running
configuration. To view the complete
SCE 2000
platform running configuration, including both
default and user-configured configuration, you may use the option
all-data
in the
show
running-config
command.
