Cisco C880 M5, Руководство по обслуживанию

Страница: 85 / 174

85
SET1302000
13.2 Work Items, Work Assignment, and Work Time
“Table 13.2” lists the work items, standard work time, and the person in charge of these types of work.
Table 13.2
Work item Person in charge Work time
(minute)
Checking the delivered items Service engineer 5
Installing option Service engineer 10
Verifying operation Service engineer 15
Preparation of handing over to
the System Administrator
Service engineer 1
Handover to the system administrator System administrator and
Service engineer
5
SET1303000
13.3 Procedure for Installing a Micro SD
SET1303010
13.3.1 Checking the delivered items
(1) Check the delivered items by confirming the following.
1. The types and quantities of delivered options match those written on the order sheet.
2. The delivered items match those listed in the List of Accessories.
3. All cabinets are free of any abnormalities such as scratches, dents, or dirt.
4. The specifications and version level of units delivered separately due to delivery considerations
are available for the target functions.
(2) Proceed to “ 13.3.2 Installing option ”.
SET1303020
13.3.2 Installing option
Install according to the following procedures.
ANNT)
- The installation location and quantity have to indicate by the system administrator.
- Confirm connecting position of power cable of the Base Unit beforehand.
(1) Turn off AC power of the Base Unit.
(2) Remove the SB#0.
See Appendix F.2.2 “ Removing SB ”.
(3) Install the Micro SD onto BMM Board of the SB#0.
See Appendix F.15 “ Installing eLCM Activation License ”.
(4) Install the SB#0.
See Appendix F.2.1 “ Installing SB ”.
(5) Turn on AC power of the Base Unit.
→ Wait until green indicator of the “System Power” turns off.