Cisco C880 M5 Configuration Guide
39
3.5 Configuration via UEFI setup utility
4.
Open the
Console Redirection
menu:
Figure 7:
Console Redirection
menu
5.
In the
Console Redirection
field, enter
Serial1
. In this case, the terminal uses
the first serial interface.
6.
In the
Baud Rate
field, specify the baud rate.
7.
Do not change the setting in the
Protocol
field. (The setting depends on the
terminal type used.)
8.
The setting in the
Flow Control
field also depends on the terminal type used.
The settings must be the same on both terminal and managed server.
9.
Save your settings and exit the UEFI setup utility.
10.
Continue with testing the LAN interface. (For more information, refer to the "Cisco
C880 M5 Administration Guide")
