manualshive.com logo in svg

Cisco BWX 110, Руководство пользователя, Страница: 8 / 60

Поделиться
Скачать
Cisco BWX 110 Скачать руководство пользователя страница 8

2-2

 BWX 110 Desktop Modem User Guide

OL-16307-03

Chapter 2      Regulatory Information

FCC Notice

This product has been tested and found to be safe in accordance with the Australian Standard for Human 
Exposure to Radiation where the user or other parties are 20 cm or more from the aerial.

INFORMATION TO USER

This device has been authorized as a radio frequency transmitter under the appropriate rules of the 
Federal Communications Commission. Any changes or modifications not expressly approved by Cisco 
could void the user’s authority to operate the equipment.

INFORMATION REGARDING ANTENNAS

This device has three embedded antennas: one upright antenna with approximately 2 dBi gain and two 
patch antennas, one on each side of the device. Each patch antenna has approximately 6 dBi gain.

This product has been tested and met all the applicable requirement of the R&TTE directive (99/5/EC). 

This product has been tested and found to be safe in accordance with the Australian Standard for Human 
Exposure to Radiation where the user or other parties are 20 cm or more from the antenna. 

Содержание BWX 110





























































Отзывы:

Нет отзывов