C H A P T E R
1-1
BWX 110 Desktop Modem User Guide
OL-16307-03
1
Safety Information & Battery Procedures
Safety Information
To optimize safety and expedite installation and service, read this section. Follow all warnings, cautions,
and instructions marked on the equipment and included in this document.
To aid in the prevention of injury and damage to property, cautionary symbols have been placed in this
document to alert the reader to known potentially hazardous situations, or hazards to equipment or
procedures. The symbols are placed before the information to which they apply. However, any situation
that involves heavy equipment and electricity can become hazardous, and caution and safety should be
practiced at all times when installing, servicing, or operating the equipment.
Caution
Caution Symbol - Possible equipment or property damage
Warning
Warning Symbol - Could cause personal injury or otherwise be hazardous to your health
Cisco expressly requires that when using Cisco electronic equipment always follow the basic safety
precautions to reduce the risk of electrical shock, fire, and injury to people and/or property.
1.
Follow all warnings and instructions that come with the equipment.
2.
Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the
equipment to water could cause severe electrical shock or serious damage to the equipment.
3.
Do not allow any type of liquid to come in contact with the equipment. Unplug the equipment from
the power source before cleaning. Use a damp cloth for cleaning. Do not use any soaps or liquid
cleaners.
4.
Follow all airport and FAA regulations when using the equipment on or near aircraft.
5.
Only operate the equipment from the type of power source(s) indicated in this manual (110/220
VAC, 60/50 Hz or Cisco supplied battery). Any other type of input power source may cause damage
to the equipment.
6.
Power the equipment using only the battery or the AC adapter cable provided, and in accordance
with the instructions specified in the User Guide.
7.
Do not use a frayed or damaged power cord. Do not place the power cord where it can be stepped
on or tripped over.
8.
Do not touch wires where the insulation is frayed or worn unless the equipment has been
disconnected from its power source.
