10-5
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Chapter 10 Synchronous Ethernet Support
Configuring Synchronous Ethernet
Configuring Clock Recovery from SyncE
This section describes how to configure clock recovery on Cisco ASR 1000 Series Router from SyncE
method.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
network-clock synchronization automatic
4.
network-clock synchronization ssm option
option_Id Generation_Id
5.
interface gigabitethernet slot/port
6.
synchronous mode
7.
exit
8.
network-clock input-source
priority
{interface
interface_name slot
/
card
/
port
| {external
slot
/
card
/
port
}}
9.
exit
DETAILED STEPS
Command
Purpose
Step 1
enable
Example:
Router#
enable
Enables the privileged EXEC mode.
Enter your password if prompted.
Step 2
configure
terminal
Example:
Router#
configure terminal
Enters the global configuration mode.
Step 3
network-clock synchronization automatic
Example:
Router(config)#
network-clock
synchronization automatic
Enables the network clock selection algorithm. This
command disables the Cisco-specific network-clock
process, and turns on G.781-based automatic clock
selection process.
Step 4
network-clock synchronization ssm
option {
option_id
{
GEN1
|
GEN2
}}
Example:
Router(config)#
network-clock
synchronization ssm option 2 GEN1
Configures the equipment to work in a synchronization
network. The
option_id
value 1 refers to a
synchronization networks design for Europe. This is the
default value. The
option_id
value 2 refers to a
synchronization networks design for the U.S.
