8-8
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Chapter 8 Console Port, Telnet, and SSH Handling
Configuring Persistent SSH
Configuring Persistent SSH
This task describes how to configure persistent SSH on the Cisco ASR 1000 Series Routers.
SUMMARY STEPS
1.
(Required)
enable
2.
(Required)
configure
terminal
3.
(Required)
transport-map type persistent ssh
transport-map-name
4.
(Required)
connection wait
[
allow
{
interruptible
} |
none
{
disconnect
}]
5.
(Required)
rsa keypair-name
rsa-keypair-name
6.
(Optional)
authentication-retries
number-of-retries
7.
(Optional)
banner
[
diagnostic
|
wait
]
banner-message
8.
(Optional)
time-out
timeout-interval-in-seconds
9.
(Required)
transport interface GigabitEthernet 0
10.
(Required)
exit
11.
(Required)
transport type persistent ssh input
transport-map-name
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router>
enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure
terminal
Example:
Router#
configure terminal
Enters global configuration mode.
Step 3
transport-map type persistent ssh
transport-map-name
Example:
Router(config)#
transport-map type persistent
ssh sshhandler
Creates and names a transport map for handling persistent
SSH connections, and enters transport map configuration
mode.
