manualshive.com logo in svg

Cisco Aironet 1200 Series, Руководство по настройке программного обеспечения

Cisco Aironet 1200 Series - современное и надежное сетевое оборудование для беспроводного подключения. Загрузите бесплатное руководство по установке оборудования с сайта manualshive.com. Идеальное решение для офисов и предприятий, которые нуждаются в быстром и надежном интернет-подключении.

Поделиться
Скачать
background image

 

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT 
NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT 
ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR 
THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION 
PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO 
LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as 
part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California. 

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE 
PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED 
OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 
NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL 
DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR 
INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGES.

Cisco Aironet 1200 Series Access Point Software Configuration Guide

Copyright © 2002, Cisco Systems, Inc.
All rights reserved.

CCIP, the Cisco Arrow logo, the Cisco 

Powered 

Network mark, the Cisco Systems Verified logo, Cisco Unity, Follow Me Browsing, FormShare, Internet 

Quotient, iQ Breakthrough, iQ Expertise, iQ FastTrack, the iQ Logo, iQ Net Readiness Scorecard, Networking Academy, ScriptShare, SMARTnet, 
TransPath, and Voice LAN are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, Discover All That’s Possible, The 
Fastest Way to Increase Your Internet Quotient, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, 
CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, the Cisco IOS logo, Cisco Press, Cisco Systems, Cisco 
Systems Capital, the Cisco Systems logo, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherSwitch, Fast Step, GigaStack, 
IOS, IP/TV, LightStream, MGX, MICA, the Networkers logo, Network Registrar, 

Packet

, PIX, Post-Routing, Pre-Routing, RateMUX, Registrar, 

SlideCast, StrataView Plus, Stratm, SwitchProbe, TeleRouter, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. 
and certain other countries. 

All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a 
partnership relationship between Cisco and any other company. (0206R)

Содержание Aironet 1200 Series





























































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Aironet 1200 Series

NAIM AV2 Update Instructions preview
AV2
Бренд: NAIM Страницы: 2
Xantrex C12 Owner'S Manual preview
C12
Бренд: Xantrex Страницы: 8
ICP DAS USA ZT-2510 Series Quick Start Manual preview
ZT-2510 Series
Бренд: ICP DAS USA Страницы: 8
Paradyne FrameSaver 9120 Installation Instruction Supplement preview
FrameSaver 9120
Бренд: Paradyne Страницы: 2
XESS XStend XS40 User Manual preview
XStend XS40
Бренд: XESS Страницы: 23
Paradyne COMSPHERE 3610 User Manual preview
COMSPHERE 3610
Бренд: Paradyne Страницы: 112
Cambium Networks PMP 450 Series User Manual preview
PMP 450 Series
Бренд: Cambium Networks Страницы: 215
Datasheen D902AC User Manual preview
D902AC
Бренд: Datasheen Страницы: 25
VMIC VMICPCI-7755 Product Manual preview
VMICPCI-7755
Бренд: VMIC Страницы: 126
DPtech LSW3003 Series Manual preview
LSW3003 Series
Бренд: DPtech Страницы: 39
KPN MIK820 Quick Start Manual preview
MIK820
Бренд: KPN Страницы: 14
LSI MegaRAID SCSI 320-2X Quick Installation Manual preview
MegaRAID SCSI 320-2X
Бренд: LSI Страницы: 4
Tripp Lite N201-005-BL Specification Sheet preview
N201-005-BL
Бренд: Tripp Lite Страницы: 3
Renesas RL78/G11 User Manual preview
RL78/G11
Бренд: Renesas Страницы: 2
CyberTAN WR214C User Manual preview
WR214C
Бренд: CyberTAN Страницы: 67
Ace ADSL2+ Wireless MIMO Router User Manual preview
ADSL2+ Wireless MIMO Router
Бренд: Ace Страницы: 64
Bitspower BPTA-CPUMS-V2-SKA Instruction Manual preview
BPTA-CPUMS-V2-SKA
Бренд: Bitspower Страницы: 6
DigiTech RPX400 Troubleshooting Manual preview
RPX400
Бренд: DigiTech Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды