Cisco 8800 Series, Руководство пользователя

Страница: 245 / 544

Preset 1 Pattern and
Color Default Pattern and
Color Field and Description
Blinking red Slower blinking red Parking Lot Busy LED—The monitored line has a
parked call.
The following table describes the LED behavior for the Busy Lamp Field (BLF) feature. The table compares
the Default and Preset 1 settings.
Table 43: BLF Feature Settings
Preset 1 Pattern and Color Default Pattern and Color Field and Description
Off Solid green BLF Idle LED—The monitored line
is idle.
Blinking amber Fast blink red
For the key expansion module, it is
Slow blink red because the key
expansion module is limited to:
• ON
• OFF
• Slow Blink
BLF Ringing LED—The monitored
line is ringing.
Solid red Solid red BLF Busy LED—The monitored
line is busy in a call.
Solid red Slow blink red BLF Held LED—The monitored
line has put a call on hold.
Applies to phone line keys, only:
BLF Busy LED applies to key
expansion module line keys.
After you configure a phone with custom LED behavior, and you downgrade it to an older Firmware version,
the custom LED settings remain. If you wish to remove the custom LED settings, then set the LED behavior
to the system
default before you perform the downgrade.
Set Up a Phone for Remote SDK
You can configure remote SDK for a multiplatform phone. The remote SDK provides a WebSocket based
protocol through which the phone can be controlled.
Before you begin
• Access the Phone Web Interface, on page 104
• A WebSocket server must be running with an address and port reachable from the phone.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
225
Cisco IP Phone Configuration
Set Up a Phone for Remote SDK