Cisco 8800 Series, Руководство пользователя

Страница: 179 / 544

Step 2 In the BLF List URI field, enter
uri_name@server
The
BLF List URI
field must have the same value as that configured for the
List URI:sip
parameter on the
BroadSoft server.
You can also configure this parameter in the configuration file (cfg.xml) by entering a string in this format:
<BLF_List_URI ua="na">uri_name@server</BLF_List_URI>
Step 3 From the
BLF List Feature Options
drop down list, select
prk
.
You can also configure this parameter in the configuration file (cfg.xml) by entering a string in this format:
<BLF_List_Feature_Options ua="na">prk</BLF_List_Feature_Options>
The allowed values are blf+sd+cp|prk. The default value is blf+sd+cp.
When the BLF List Feature Options field is set to prk , the auto-assigned keys are used only for
the call park function.
Note
Step 4
Click Submit All Changes .
Add Call Park to a Line Key
You can add call park to a line key to enable the user to temporarily store and retrieve calls. Call park is
supported on private lines and shared lines.
Before you begin
Access the phone administration web page. See Access the Phone Web Interface, on page 104 .
Procedure
Step 1
Select Voice > Phone .
Step 2
Select a line key.
Step 3 Set the
Extension
field to
Disabled
.
You can also configure the parameter in the configuration file (cfg.xml). The parameter is line-specific. Enter
a string in the following format:
<Extension_2_ ua="na">Disabled</Extension_2_>
Step 4 In the Extended Function field, enter a string in this format:
For a private line, enter
fnc=prk;sub=$USER@$PROXY;nme=CallPark-Slot1
For a shared line, enter
fnc=prk;sub=$USER@$PROXY;nme=Call-Park1;orbit=<DN of primary line>
where:
• fnc= prk means function=call park
• sub= 999999 is the phone to which the call parks. Replace 999999 with a numbers.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
159
Cisco IP Phone Configuration
Add Call Park to a Line Key