Cisco 8800 Series, Руководство пользователя

Страница: 194 / 544

Before you begin
Access the Phone Web Interface, on page 104 .
Procedure
Step 1 Select
Voice
>
Ext(n)
, where
(n)
is the number of a phone extension.
Step 2 In the Call Feature Settings section, select the Default Ring parameter from the list or select no ring.
You can also configure this parameter in the configuration file (cfg.xml) by entering a string in this format:
<Default_Ring_3_ ua="rw">1</Default_Ring_3_>
Step 3 Select Voice > Phone .
Step 4 In the Ringtone section, set the Ring(n) and Silent Ring Duration parameters as described in the Parameters
for Ringtone, on page 174 table.
Step 5
Click Submit All Changes .
Parameters for Ringtone
The following table describes the parameters for Ringtone .
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
174
Cisco IP Phone Configuration
Parameters for Ringtone