manualshive.com logo in svg

Cisco 7940G, Руководство администратора

Поделиться
Скачать
Cisco 7940G Скачать руководство пользователя страница 95

 

A-5

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

OL-7890-01

Appendix A      Compliance with RFC 3261

SIP Responses

411 Length Required

Yes

This response indicates that the user refuses to accept 
the request without a defined content length. If 
received, the phone resends the INVITE request if it 
can add a valid Content-Length header field.

413 Request Entity Too 
Large

Yes

If a retry-after header field is contained in this 
response, the user can attempt the call once again in the 
retry time provided.

414 Request—URL Too 
Long

Yes

The user is notified if this response is received.

415 Unsupported Media

Yes

The user is notified if this response is received.

420 Bad Extension

Yes

The user is notified if this response is received.

If the phone does not understand the protocol 
extension specified in the Require field, the 420 Bad 
Extension response is generated.

480 Temporarily 
Unavailable

Yes

The response is received only by the phone. The user 
is notified if this response is received.

481 Call Leg/Transaction 
Does Not Exist

Yes

The user is notified if this response is received.

482 Loop Detected

483 Too Many Hops

484 Address Incomplete

485 Ambiguous

Yes

If a new contact is received, the phone might reinitiate 
the call.

486 Busy Here

Yes

The phone generates this response if the called party is 
off-hook and the call cannot be presented as a 
call-waiting call. Upon receiving this response, the 
phone notifies the user and generates a busy tone.

487 Request Canceled

Yes

This response indicates that the initial request is 
terminated with a BYE or CANCEL request.

488 Not Acceptable

Yes

When media cannot be negotiated properly, the phone 
receives and generates this response.

491 Request Pending

Yes

Indicates a glare condition (when INVITE requests 
cross). The phone supports sending and receiving this 
response.

4

xx

 Response

Supported?

Comments

Содержание 7940G

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды