D-19
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
OL-7890-01
Appendix D SIP IP Phone Parameters
TFTP Server
IP address of the TFTP server.
Note
If you have an administrative VLAN
setting assigned on the Catalyst switch,
that setting overrides any changes made
on the phone.
Note
DHCP must be disabled.
GARP Enabled
Enables or disables generation of the Gratuitous
ARP packets from the phone.
Table D-2
Network Parameters (continued)
Parameter
Description
Table D-3
SIP Parameters
Parameter
Description
Authentication Name
(Phone-specific) Name used by the phone for
authentication if a registration is challenged by
the proxy server during initialization.
Note
Required when registration is enabled and
the registrar challenges registration.
Authentication Password
(Phone-specific) Password used by the phone for
authentication if a registration is challenged by
the proxy server during initialization. If a value is
not configured for the Authentication Password
parameter when registration is enabled, the
default logical password is used. The default
logical password is SIP
mac-address,
where
mac-address
is the MAC address of the phone.
Note
Required when registration is enabled and
the registrar challenges registration.
Display Name
(Phone-specific) Identification as it should appear
for caller identification. For example, instead of
[email protected] appearing on phones that
have caller ID, you can specify User A in this
parameter to have User A appear on the callee end
instead. If a value is not specified for this
parameter, the Name value is used.
Name
(Phone-specific) Description phone number or
e-mail address used when registering. When
entering a number, enter the number without any
dashes. For example, enter 555-0100 as 5550100.
When entering an e-mail address, enter the e-mail
ID without the host name.
Proxy Address
(Phone-specific) IP address of the primary SIP
proxy server that will be used by the phone. Enter
this address in IP dotted-decimal notation.
