Cisco 6800 Series, Руководство администратора

Страница: 295 / 358

Call Feature Settings
Description Parameter
Enables the phone to perform an attended transfer
operation by ending the current call leg and
performing a blind transfer of the other call leg. If this
feature is disabled, the phone performs an attended
transfer operation by referring the other call leg to the
current call leg while maintaining both call legs. To
use this feature, select Yes. Otherwise, select No.
Default: No
Blind Attn-Xfer Enable
Indicates whether the Message Waiting Indicator on
the phone is lit. This parameter toggles a message
from the SIP proxy to indicate if a message is waiting. Message Waiting
Specifies whether to authenticate the invite before
auto answering a page.
Default: No
Auth Page
Type of ring heard. Choose from No Ring or 1 through
10.
Ring options are Sunlight, Chirp 1, Chirp 2, Delight,
Evolve, Mellow, Mischief, Reflections, Ringer,
Ascent, Are you there, and Chime.
Default Ring
Identifies the Realm part of the Auth that is accepted
when the Auth Page parameter is set to Yes. This
parameter accepts alphanumeric characters. Auth Page Realm
URL used to join a conference call, generally in the
form of the word conference or user@IPaddress:port. Conference Bridge URL
Identifies the password used when the Auth Page
parameter is set to Yes. This parameter accepts
alphanumeric characters. Auth Page Password
Identifies the voice mailbox number/ID for the phone. Mailbox ID
Identifies the SpecVM server for the phone, generally
the IP address, and port number of the VM server. Voice Mail Server
The expiration time, in seconds, of a subscription to
a voice mail server. Voice Mail Subscribe Interval
Determines the behavior of the phone when a page
call arrives. Auto Ans Page On Active Call
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
281
Phone Troubleshooting
Call Feature Settings