CISCO S3000/S5000 SERIES MEDIA PROCESSORS
9
NOTE:
The security certificate shipped with a Cisco Media
Processor unit is a temporary certificate for test purposes
only. A valid security certificate needs to be purchased and
installed.
Until the new certificate is installed, each time you bring up
the Web interface you will receive a warning message that
will require you to accept the shipped security certificate to
proceed.
For further information on security certificates, see Appendix
C: Troubleshooting on page 51.
Logging In
Once you have browsed to the Cisco Media Processor Web interface, you must log in
with a valid user name and password on the following page:
Cisco Media Processor defines two user groups:
encoder users
and
encoder
administrators
. Encoder users are only allowed to view the status of the system.
Encoder administrators are allowed to configure, start and stop the system.