CISCO S3000/S5000 SERIES MEDIA PROCESSORS
5
Use the following diagram for reference while installing connections to a S3200 Series
unit:
Video and Audio
Connect each provided breakout adapter cable for the video and audio input signals to
the 44-pin breakout connector for each channel that will be used for encoding. For
reference, consult the following diagram of the breakout cable connections (outputs are
not used):
Figure 2: Cisco S3200 Series Media Processor Analog Input Breakout Adapter Cable
See the chart on page 4 to determine which connectors to use for analog sources.
Ethernet Ports
Connect the cable for the network that will be used to manage your Cisco Media
Processor to one of the available Ethernet ports. Use a Cat. 5 (or better) Ethernet cable.