Cisco 12010 series, Руководство по установке и настройке

Страница: 67 / 378

2-3
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
OL-11496-01
Chapter 2 Preparing for Installation
Safety Guidelines
Compliance and Safety Information
The Cisco 12010, Cisco 2410 and Cisco 12810 routers are designed to meet the
regulatory compliance and safety approval requirements. Refer to the
Regulatory
Compliance and Safety Information for the Cisco 12000 Series Router
(Document Number 78-4347-xx) if you require additional compliance
information (see
Obtaining Documentation for site information).
Laser Safety
Single-mode Cisco 12000 Series Router line cards are equipped with lasers. The
lasers emit invisible radiation.
Do not stare into open line card ports. Observe the
following warning to prevent eye injury:
Warning
Avoid exposure to laser radiation. Do not stare into an open aperture, because
invisible laser radiation may be emitted from the aperture when a cable is not
inserted in the port.
Preventing Electrostatic Discharge Damage
Many router components can be damaged by static electricity. Not exercising the
proper electrostatic discharge (ESD) precautions can result in intermittent or
complete component failures. To minimize the potential for ESD damage, always
use an ESD-preventive antistatic wrist strap (or ankle strap) and ensure that it
makes good skin contact.
Note Check the resistance value of the ESD-preventive strap periodically. The
measurement should be between 1 and 10 megohms.
Before you perform any of the procedures in this guide, attach an ESD-preventive
strap to your wrist and connect the leash to the chassis as shown in
Figure 2-1 .
Note that some versions of the 10-slot chassis do not provide an ESD connection
socket in the line card cage area. For those chassis, use an alligator clip to connect
the leash to an open metal part of the chassis.