VCC-5CXP3R
Rev. 905-0052-00
©2016 CIS Corporation. All rights reserved.
17
8.5
Defective Pixel Correction
CIS compensates the noticeable CMOS pixel defects found at the shipping inspection prior to our shipment.
Defective pixel correction can be set to OFF.
AnalogControl
DefectivePixelCorrection
True
False
8.6
Shading Correction
This is a function to correct the peripheral brightness lowering caused by the lens and others used.
AnalogControl
ShaddingCorrection
True
False
DetectShading
(Execute)
・
Shading Detection
(DetectShading)
Shoot a uniform object such as a pattern box, to full screen, then turn shading detection ON, to calculate and save the
correction data automatically in the camera.
※
When setting a shading correction data, please make sure that ROI and sub-sampling settings are OFF.
※
When execute DetectShading, please make sure to input trigger within 200ms after executing.
◆
Before Shading Correction
◆
After Shading Correction
8.7
Black Offset
AnalogControl
BlackOffset
0
～
255
・
Initial value is 64.
・
Black level can be adjusted by relative value. When increase/decrease 1 value, luminance level shall fluctuate per approx.
0.25 lux when output 8bit. When in 10bit output, luminance level shall fluctuate per 1.0 lux.
・
If the value less than initial value is set, saturation level might not reach the max. value of output range.
8.8
Test Pattern Indication
ImageFormatControl
TestImageMode
OFF/ON
Aegis Electronic Group, Inc.
