Cirronet SEM2410, Руководство пользователя

Страница: 16 / 22


2000, 2001 Cirronet

Incorporated 13 M-2410-0007 Rev -
SEM System Commands
Command Description
echo
Toggles user screen echo mode
help
Displays command help screen
reset Resets the SEM activating changed configuration
parameters
save Stores current configuration to memory
sys [help
outmax [1..208]
Displays help screen for command
Sets the maximum packet length
version
Diplays SEM firmware version
echo Toggles the user screen mode to echo characters typed by the user. Default is
on. If echo is turned off, characters typed will not be displayed on the screen
unless echoed by the terminal program.
help Displays a list of all the SEM commands. Most commands that require a
parameter also have a help mode that displays the help screen for that
command.
reset Resets the SEM and loads saved parameters into active memory. Also causes
the SEM to reinitialize which can take 30 seconds. If reset is issued before
the save command, the new parameters are lost and the last saved parameters
are used.
save Saves changed parameters in non-volatile memory to be loaded on power up.
Must be issued before the reset command or cycling power to have changed
parameters take effect. (An exception is the sys outmax command which
becomes active immediately after it is entered.)
sys outmax Sets the length in bytes of the packets the processor in the master SEM will
send to the internal radio. Setting this parameter in a slave device has no
effect.
version Displays the SEM firmware version.