Cirronet SEM2410, Руководство пользователя

Страница: 14 / 22


2000, 2001 Cirronet

Incorporated 11 M-2410-0007 Rev -
SEM/Radio Commands
Command Description
bridge [help
filter [disable, mcast,
bcast, show]
master
slave]
Displays help screen for command
Selects filtering operation and level.
Sets bridge as a master
Sets bridge as a slave
hop [help
length <hoplen>
sequence [75|25]
Displays help screen for command
Sets/displays hop dwell time in radio and SEM
Informs SEM of number of frequencies in radio hop
pattern
remote [ help
list]
Displays help screen for command
Displays remotes currently registered with the SEM
sync [help
disable
ether
master
override
settings
slave
wire]
Displays help screen for command
Turns sync off (default)
Sets synchronization mode to use Ethernet packets
Sets SEM as sync master
Toggles master backup override
Displays synchronization settings
Sets SEM as sync slave
Sets synchronization mode to use RJ-11 wire ports
bridge Selects filtering mode and sets master/slave status.
filter disable
turns filtering off.
filter bcast
filters out broadcast and
multicast packet while
filter mcast
filters out just multicast packets.
filter show
displays the filter settings.
master/slave
sets the bridge as either a master or a slave. One bridge must
set as the master and all others must be set as slaves. The default setting is
slave.
hop Used to set the hop dwell time or the number of frequencies in the hop
pattern of the radio in the SEM.
The parameter entered for
length
is the decimal value of the number of 625
µ
sec ticks in the desired dwell time. A value of
16
corresponds to a hop dwell
time of 10 msec and is the default.
6
is the minimum value and
28
is the
maximum value. The dwell time is changed to optimize the data throughput
for a given installation.