Circutor eHome T1C16, Инструкция по эксплуатации

Страница: 8 / 42

8
eHome
Instruction Manual
PENDIENTE DE V
ALIDACIÓN
3�- DEVICE INSTALLATION
3.1.- PRELIMINARY RECOMMENDATIONS
The device is designed for installation in indoor and outdoor areas. Whatever is the case, the
device must be installed safely and with the adequate electrical protections.
In order to use the device safely, it is essential that the individuals who handle
it follow the safety measures set out in the standards of the country where it is
being used.
The
eHome
device must be installed by authorised and qualified staff.
The eHome must not be installed in areas where there is a potential risk of explosions.
Do not install the device where falling objects may damage the equipment.
The wall surface where the device is placed must withstand the mechanical forces.
Do not use this device for anything other than electric vehicle charging modes which are ex-
pected in IEC 61851.
Do not make repairs or manipulations with the unit energised.
The manufacturer of the device is not responsible for any damage resulting from failure by the
user or installer to heed the warnings and/or recommendations set out in this manual, nor for
damage resulting from the use of products or accessories that did not come with the device or
that were made by other manufacturers.
Check the installation annually by qualified technician.
Remove from service any item that has a fault that could be dangerous for users (broken plugs,
caps that don’t close...).
Do not use this product if the enclosure or the EV connector is broken, cracked, open, or shows
any other indication of damage.
Disconnect the device from the power supply before maintaining, repairing or
handling the device’s connections.
Please contact the after-sales service if you suspect that there is an operational
fault in the device.
Do not modify this device.
The warranty will be void.