Circutor eHome T1C16, Инструкция по эксплуатации

Страница: 14 / 42

14
eHome
Instruction Manual
PENDIENTE DE V
ALIDACIÓN
Be careful of not damaging any of the inside components when breaking out
the rear cable insertion opening.
3�5�2�- USING THE BOTTOM CABLE INSERTION OPENING�
Introduce the cable through the opening and fix it properly by means of the supplied M25 cable
gland.
Figure 9:Bottom opening�
Note:
The power supply cable must be 3x4mm
2
(for the 16 A models) and 3x6mm
2
(for the 32
A models) to meet the supplied cable gland.
Do not make any other holes on the enclosure. Use only the named cable in-
sertion opening to install the required electric pipes.
Install always either cable glands or double membrane seals to ensure IP
protection of the device�
3.6.- WALL FIXATION PROCEDURE
3�6�1�- NEEDED MATERIAL
Below, it is shown the list of materials (not included) that are necessary to fix the device on the
wall:
Table 3:Needed material�
Material Quantity Dimensions Picture
Wall plug 3 Ø 6 mm
Screws 3 4x45 mm