Circutor eHome T1C16, Инструкция по эксплуатации

Страница: 29 / 42

29 Instruction Manual
eHome
PENDIENTE DE V
ALIDACIÓN
4.2.- FIRMWARE VERSION
When the device is booting, the LED bar will show the firmware version in orange.
The first digit of the version will be shown as a certain number of blinkings of the first LED, as
many times as the digit indicates, and the second digit will be displayed by the last LED blinking
accordingly to what the second digit indicates (i.e. for version 1.6, you will see one blink at the
first LED and six at the last LED).
Figure 30:Firmware version�
4.3.- CHARGING PROCEDURE
1�-
When the status LED bar is in green colour
,
it means that the device is available and ready
to start a recharge (A status)*�
(1)
.
Figure 31:The device is available to start a recharge�
2�- To start a new recharge, plug the eHome cable into your car.
3�-
The status LED bar turns into blue. And the
eHome
starts the charging process.
While charging the EV, the LED bar will be flashing continuously ( status C )
(1)
.