Circutor eHome T1C16, Инструкция по эксплуатации

Страница: 13 / 42

13 Instruction Manual
eHome
PENDIENTE DE V
ALIDACIÓN
3.5.- POWER SUPPLY LINE CABLE INSERTION
There are two possibilities to insert the electric wires or electric pipe:

Using the rear cable insertion opening.

Using the bottom cable insertion opening.
In all cases it is required to install a cable gland to ensure properly installation and preserve the
IP of the device.
Rear cable insertion
opening
Bottom cable insertion
opening
Figure 7:Cable insertion opening�
3�5�1�- USING THE REAR CABLE INSERTION OPENING
Use a hammer and a flathead screwdriver carefully in order to break out the cable insertion
opening, as shown in the picture below:
Figure 8:Rear opening�
Do not make any other holes on the enclosure. Use only the marked cable in-
sertion openings to install the required electric pipes.
Install always double membrane seals to ensure IP protection of the de-
vice�