Circutor eHome T1C16, Инструкция по эксплуатации

Страница: 21 / 42

21 Instruction Manual
eHome
PENDIENTE DE V
ALIDACIÓN
3.10.- CHECKING THE DEVICE STATUS
Once all installation procedure has been performed, check the following points:
1�- Check that the EV tethered cable and its connector are in proper conditions before starting
the charging operation.
2�- Check that no abnormal noise appears while the device is charging.
3�- Check the status LED bar to know the present operating status of the device. Below you can
see the
Table 5
with the four possible LED bar operating colors:
Table 5: Checking the device status�
State LED bar color
Available Green
Charging
Blue flashing
Charged Blue
Fault Red flashing
Heating Orange
Note: For further information about the different status led bar sequences, please refer to
4.-
OPERATION
section.