Document NO. M-7E-EM-English
PAGE
Page 21 of 25
Engineer Manual-Trouble Shooting
VERSION
B
3.
Engineering Mode
3.1.
Engineering Mode ONE: Factory Settings
3.1.1.To pull out the emergency stop key then press START and FAST simultaneously and
put the emergency key back, to leave you hand from keys till dot-matrix window
show WELCOME.
3.1.2.LED will do the scan mode after dot-matrix window show WELCOME, then dot-matrix
will show『TM016 FACTORY SETTINGS PRESS ENTER』。
3.1.2.1.
Press ENTER to set UNIT:dot-matrix show『UNITS ENGLISH』,press Fast、
Slow、Up or Down to change to『UNITS METRIC』。UNITS ENGLISH:mile、LB.
UNITS METRIC:km/h、kg.
3.1.2.2.
Press ENTER to set engineer mode alphabetic string display while you get
into engineer mode:The preset words are『WELCOME』, Heart Rate window
show the sort number of word, max 20 characters include symbol and space.
Press FAST or SLOW to choice the sort number of word 1~20, press UP or
SLOW to choice the characters A~Z/0~9/space/ - , press SELECT to add sort
number of word(preset 13 sort number of words, to add sort number while
sort number at last number then press SELECT).
3.1.2.3.
Press ENTER to power setting:Dot-matrix show『POWER ON』, press Fast、
Slow、Up or Down to change to『POWER OFF』. OFF:No any display when pull
out the emergency key.
3.1.2.4.
Press ENTER to incline setting:Dot-matrix show『GS INCLINE OFF』, press
Fast、Slow、Up or Down to change to『GS INCLINE ON』。OFF:Incline return
to lowest position when reset. ON:Incline return to lowest position after
press START.
3.1.2.5.
Press ENTER to set AC/DC system:Dot-matrix show『DC SELECTED』, press
Fast、Slow、Up or Down to change to『AC SELETED』.
3.1.2.6.
Press ENTER to set roller size:TIME window show WHEL SIZE, dot-matrix
show『ADJUST WHEEL SIZE THEN PRESS ENTER』, press Fast、Slow、Up or Down
to set the roller size, range from 1.0 to 3.5. If treadmill roller size
is 70mm, please set 2.78, if roller size is 90mm please set 3.56.
3.1.2.7.
Press ENTER to set min speed:TIME window show MIN SPEED, dot-matrix show
『ADJUST MIN SPEED THEN PRESS ENTER』, press Fast、Slow、Up or Down to
set the min speed that you want.
3.1.2.8.
Press ENTER to set the max speed:TIME window show MAX SPEED, dot-matrix
show『ADJUST MAX SPEED THEN PRESS ENTER』, press Fast、Slow、Up or Down
to set the max speed that you want.
3.1.2.9.
Press ENTER to set MAX ELEVATION, INCLINE window show 『15』, dot-matrix
show『ADJUST MAX ELEVATION THEN PRESS START TO CALIBRATION』do not to
modify this item.