Document NO. M-7E-EM-English
PAGE
Page 22 of 25
Engineer Manual-Trouble Shooting
VERSION
B
3.1.3.Press START to begin speed calibration.
3.1.3.1.
The dot-matrix window show『SPEED CALIBRATION』when calibrating.
3.1.3.2.
CALORIES window show speed parameter, SPEED show real speed value, TIME
window show front roller RPM, speed parameter shall between 340~350 at
max speed 20KPH in the normal condition.
3.1.3.3.
Calibrating the min speed to fit set min speed first, then calibrating
the max speed. It will return to idle mode after finish the calibration
and to erase the memory data of user program.
3.2.
Engineering Mode TWO: Used Information Management
3.2.1.To pull out the emergency stop key then press START and SLOW simultaneously and
put the emergency key back, to leave you hand from keys till dot-matrix window
show WELCOME.
3.2.2.The dot-matrix show software version information, TIME window show total used
time
00:00(m:s)
~
9999(h)
, DISTANCE window show total used distance
0.0
~
999.
3.2.3.You can press FAST → SLOW → FAST → SLOW → SELECT one by one to erase total
used time and distance. Press STOP back to idle mode.
3.3.
Engineering Mode THREE: Real Speed and Incline Parameter
3.3.1.Press ENTER for 5 seconds when working and buzzer will send out a “beep” sound.
SPEED window show real speed, INCLINE window show incline digital data(incline
0~15%= digital data 22~173).
3.3.2.Back to normal work display by press ENTER for 5 seconds and buzzer will send
out a “beep” sound.