Document NO. M-7E-EM-English
PAGE
Page 10 of 25
Engineer Manual-Trouble Shooting
VERSION
B
2.
Information For Components
2.1.
Interface PCB:
2.1.1.Appearance and connector description:
2.1.2.Description of pilot lamps on interface PCB:
LED2:Pilot lamp of console power, normal full light up when power ON.
LED3:Pilot lamp of decrease speed, flash when decreasing speed, switch off while
speed reached.
LED4:Pilot lamp of incline UP, light up when increase grade, switch of while
grade reached.
LED5:Pilot lamp of incline DOWN, light up when decrease grade, switch of while
grade reached.
LED6:Pilot lamp of increase speed, flash when increasing speed, switch off while
speed reached.
LED7:Pilot lamp of enable motor, light up while work, switch off while stop.
Console wire
Speed sensor wire
Inverter control wire
Incline VR wire
AC power input
90~240Vac
Incline UP
Incline COM
Incline DOWN
Inverter AC power
LED2
LED7
LED6
LED3
LED4
LED5
U5
U2
U1