
MAN1010119 rel. 01 dated 30.01.2014
page no. 47 of 52 page
www.rheavendors.com tel: 0039 02 966 551 fax: 0039 02 96 55 086 e mail: [email protected]
rheavendors group's sole property
cino eC PRO by
12.02. monthly
dispensing system
products canister
coffee brewer
environmental and
powder aspirators
besides fulfilling the tasks already specified by chapter 12.01.
weekly, it is also recommended to act in the following districts:
disassemble all components of the dispensing system:
- extraction drawer (f)
- water dispensing ring (g)
- mixing bowl (h)
- mixer (l)
- dispensing tubes (m)
- product dispensing nozzle holder (n)
extract the mixer fan just by pulling it; check the wear state of the
w ring (i) sheathing the mixer motor shaft; wash the assembly of
disassembled parts with plenty of lukewarm water;
remove the product canisters (o) by lifting them in the front and by
pulling them; remove the cover and empty the product residue;
turn the baffles of product slides into a close-position; remove
them from the canisters and wash them with plenty of lukewarm
water, as it is described by chapter 12.01. weekly;
at the back of the product canister turn the black ring nut clockwise
and remove it; extract the worm screw by pulling the black bush;
to facilitate disassembly, push the stirring wheel in the correct
direction;
lift the two fastening clips (one for each side) from the inside of the
product canister and remove the two red plugs from the outside;
remove the stirring wheel; wash the disassembled parts with plenty
of lukewarm water;
the whole coffee brewer can be cleaned and washed with running
water since it has no component that may be damaged; to extract
the coffee brewer, first remove the coffee dispensing tube from the
nozzle holder, release the carter (p) by pressing on each side and
by pulling it to the outside, remove the ground grey conveyor just
by pulling it, remove the coffee brewer (q) by pressing the orange
release button, by lifting it slightly and by pulling it;
carefully check that the rotors of the two aspirators on the rear
panel of the vending machine can freely rotate without any
hindrance or stoppage; make sure that the corrugated tube for
connection between the powder aspirator and the extraction drawer
is clean and free of any product deposit;
o
p
q
f
g
h
l
i
n
m
Содержание eC Pro
Страница 53: ......