Cino eC Pro, Руководство по установке и обслуживанию, Страница: 20 / 53

05.38. software
05.39. rheAction
the software installed in cino eC PRO can be subdivided into two
different chapters called:
- master:
it is the software determining the machine cycles, the links
between the functions, the order of execution of operations;
this software can not be modified by the operator, but it can be
replaced in the CPU by means of a flash key written at works or
by means of rheAction (see 09.06. and 05.39.);
- configuration:
it is the software determining the times and the
succession of dispensing drinks, the payment system protocol,
the display modes, …; variables may be modified by the operator
either manually aboard the machine or by means of rheAction
(see 09.06. and 05.39.) to adapt the machine behaviour to the
final users’ needs (product quantities and mixtures, warning
messages …) (see 09.);
if it is necessary to update one of the software programmes above
on the machine, the flash key may be of great use; the key can
contain either software or both of them and provide for a rapid and
safe transfer;
please note that the flash key used for these software handlings
must have been previously initialised (with RheAction for
example);
in general, the transfer procedure is:
- power off the machine;
- insert the flash key into the corresponding connector (see
05.15.);
- power on the machine by means of the service key (see 05.13.);
- wait for the message on the machine display;
- answer the messages on the display;
- power off the machine and remove the flash key;
please note: if the flash key should contain a master software, the
transfer will certainly occur from the key to the machine, whereas
it will be necessary to follow the steps described by 09.06 in case
of a configuration software;
a system called rheAction is intended to complete and supplement
the programming executable in the machine; it is composed by a
software and hardware, installable in a pc, capable of storing,
modifying and writing the configuration data of Rhea machines;
Rheavendors Services S.p.A. is at disposal for any kind of support
and information on the RheAction system (see 02.02.);
MAN1010119 rel. 01 dated 30.01.2014 page no. 20 of 52 page
www.rheavendors.com tel: 0039 02 966 551 fax: 0039 02 96 55 086 e mail: rheavendors@rheavendors.com
rheavendors group's sole property
cino eC PRO by