HSIK Controls
Wheel Control
The Wheel Cursor and Slider controls are
the simplest methods for controlling the
fixture and are available when the
fixture is in 1 or 2-Zone modes. Select
the Wheel icon, and a color wheel and
four sliders appear: DIM, CCT and HUE
and SAT. If the +/- Green Personality is
selected, this slider also appears. The
Wheel Cursor can be moved within the
color wheel to select desired saturated
color, along with the amount of
saturation added to the CCT value, set
on the slider. Using the Sliders, values
can more accurately be set. For further accuracy, press and hold the value displayed below the Slider. A keypad
is displayed so precision values can be entered.
Shortcuts are provided by tapping on either side of the slider to jump to the next or previous logical value for
the control. These are:
DIM: Increase or decrease the output in increments of 20% by tapping on either side of the slider.
CCT: Tap the slider bar to jump between 2700, 3200, 4300, 5600, and 6500.
HUE: Tapping this slider bar jumps between the six primary and secondary saturated colors.
SAT: Increases or decreases the percentage of shift from the selected CCT to the selected saturated color.
+/- G: Presets are available at .25, .5 and Full, emulating standard gels.
All control screens include the ability to
save current settings as either a Preset
or Effect, with buttons present at the
bottom of all control screens. This will
be explained in a following section.
The Home icon in the upper left corner
always returns you to the Home screen,
while the arrow icon in the upper right
corner returns you to the previous
screen. The network icon shows the
status of network connections, as well
as displaying the network menu.
2-Zone Control