DMX Channels
By touching this area of the screen, a numeric keypad is displayed, providing a method to choose the starting
DMX address for the fixture. Based on the Operating Mode, Zone count and 8/16 bit data protocol, the DMX
address range is calculated and displayed in the DMX Address area.
Go DMX
The right side of the Home screen provides selection of all parameters of remote operation. The top “GO DMX”
button places the unit in remote mode, using all of the setting chosen below this.
DMX Operation Screen
When the LB800 is operating from a remote control, the following screen is displayed on the Control screen. This
provides substantial information about the current state of the unit, as well as information that may help troubleshoot
any communications issues.
All multi-zone data during remote control is
displayed on the DMX screen.
The current communication method
configured. If the unit is receiving
valid data, a green “checkmark”
indicates proper data, while a “red X”
indicates no valid data present.
The fixture address is
displayed in large numbers,
easy to read from a distance.
Touching the “Home”
button cancels remote
operation, returning the
unit to Local mode.
Operating Mode
Choosing either of these buttons records a preset
or Effect, based on the fixture’s current static or
dynamic settings
Overall fixture settings.
These dynamically change
based on DMX settings.
Address range for the fixture