Power and Communications interfaces
All connectors and system controls for the LB800 are located on the back of the unit. The touchscreen control display provides
access to menu selections, local control, effects/presets and remote-control options. Power connections and switch allow for easy
set up and strike. The DMX connections, RJ45 Ethernet port, embedded wireless receivers, RDM responders and powered USB port
support many options for external control.
Power Connector/Power Switch/Circuit Breaker
The LB800 unit is powered by an internal power supply, 110 – 220VAC via a locking PowerCon connector. Power is applied with the
switch above the connector. Maximum power draw is 900 watts. A self-resetting circuit breaker is located near the power
connection, which requires no user interaction. If the breaker trips, it will reset within one minute of tripping.
NOTES:
1. Ensure the power cable is disconnected before servicing.
2. Do not connect to a variable supply, such as a dimmer rack.
3. The power cable should be plugged into the power supply before switching the power ON. The power supply should be switched
OFF before removing the power cable.
Wired DMX Connections
LB800 uses industry-standard 5-Pin XLR male and female connectors to receive and pass-thru DMX signals and RDM signals. The
DMX port is self-terminating and does not require external DMX termination when used in a chain. If the unit is the last device on a
DMX chain, make sure that there is no cable inserted into the DMX Out connector.
The DMX pin wiring is as follows:
• Pin 1: Signal Common
• Pin 2: Data –
• Pin 3: Data +
• Pin 4: Spare
• Pin 5: Spare
RDM Support
The LB800 can remotely report unit information to an RDM controller via the RDM Identify command on either wired or wireless
DMX. The RDM information provided includes the model number (LB800), manufacturer’s number (1A0D), followed by the last 8
vales from the wifi MAC address, which corresponds to the Unit ID.
Power Switch
Power Input:
110-240 VAC
Self-resetting
circuit breaker
DMX In
DMX Thru
DMX Bridge port
Ethernet jack
USB Port
Touchscreen