CIGWELD TRANSarc 130i, Руководство по обслуживанию

Страница: 51 / 86

TRANSARC 170i
Manual 0-5280 6-9 Troubleshooting
DY1 Header Pin Pin function signal
1 +24 V (solenoid positive) 24 VDC
2 0 V 0 VDC
3 No connection n/c
4 No connection n/c
5 No connection n/c
Table 6-11: DY1 Header pin function (connects to DY header on control PCB)
FJ/QF Header Pin Pin function signal
1 No connection n/c
2 +24 VDC 24 VDC
3 +24 VDC 24 VDC
4 0 VDC 0 VDC
Table 6-12: FJ/QF Header pin function (not used)
RX Header Pin Pin function signal
1 Inrush Resistor
2 0Inrush Resistor
Table 6-13: RX Header pin function (connects to Inrush Resistor)
JC Header Pin Pin function signal
1 +5V +5V
2 PFC OK signal, 5V=PFC OK
Table 6-14: JC Header pin function (connects to PFC header on control PCB)
HF 220V Header Pin Pin function signal
1 240VAC active 240VAC
2 240VAC active 0VAC
Table 6-15: HF220V Header pin function (not used)
GUNIN Header Pin Pin function signal
1 Trigger 8 pin socket, pin 2
2 Remote Amps Pot, 8 pin socket, pin 5
3 Remote Amps Pot, 8 pin socket, pin 6
4 Trigger 8 pin socket, pin 3 0VDC
Table 6-16: GUNIN Header pin function (connects to 8 pin remote socket)
GUNOUT Header Pin Pin function signal
1 Trigger 8 pin socket, pin 3 0VDC
2 Trigger 8 pin socket, pin 2
3 Remote Amps Pot, 8 pin socket, pin 5
4 Remote Amps Pot, 8 pin socket, pin 6
5 Trigger 8 pin socket, pin 3 0VDC
Table 6-17: GUNOUT Header pin function (connects to GUN header on control PCB)