M-97RG2 Hardware Installation Manual
17
Compliance with CE Marking Certification (Class B)
The equipment was tested and found to comply with
EN 62368-1:2014/A11:2017;EN62311:2008.
The
equipment is tested and only used with power adaptor included in the package.
The equipment complies with the requirements according to the following standard:
ETSI EN 300 386 V1.4.1:2008
: Electromagnetic compatibility and radio spectrum Matters (ERM);
Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements
EN 55032: 2015, EN55024: 2010; EN61000-3-2:2014;EN61000-3-3:2013
：
Information technology
equipment – Radio disturbance characteristics Limits and methods of measurement.
EN 61000-4-2:2009
: Electromagnetic Compatibility (EMC) – Part 4: testing and measurement
techniques – section 2: electrostatic discharge immunity test
EN 61000-4-3:2006+A1:2008:
Electromagnetic Compatibility (EMC) – Part 4: testing and measurement
techniques – section 3: radiated, radio frequency, electromagnetic field immunity test
EN 61000-4-4:2004+A1:2010
: Electromagnetic Compatibility (EMC) – Part 4: testing and
measurement techniques – section 4: electric fast transient/burst immunity test
EN 61000-4-5:2006
: Electromagnetic Compatibility (EMC) – Part 4: testing and measureent techniques
– section 5: surge immunity test
EN 61000-4-6:2009
: 1996/+A1:2001: Electromagnetic Compatibility (EMC) – Part 4: testing and
measurement techniques – section 6: immunity to conducted disturbance, induced by radio frequency
field.
EN 61000-4-11:2004
: Electromagnetic Compatibility (EMC) – Part 4: testing and measurement
techniques – section 11: voltage dips, short interruption and voltage variations immunity test
